1. What is solarphotovoltaic glass?
Solar photovoltaic glass is a special type of glass that utilizes solar radiationto generate electricity by laminating solar cells, and has related current extraction devices and cables. It is composed of low iron glass, solar cells, film, back glass, and special metal wires. The solar cells are sealed between a low iron glass and a back glass through film, making it the most innovative high-tech glass product for construction. Using low iron glass to cover solar cells can ensure high solar transmittance. Tempered low iron glass alsohas stronger resistance to wind pressure and the ability to withstand large changes in temperature between day and night.
After installing solar cells on the edge of the glass, amixed coating is applied to the surface of the glass. The coating absorbs sunlight and transmits it to the solar cells installed on the edge of the glass at different wavelengths. Mark Bardo, a Electrical engineer at MIT and head of the research team, said: "The coating can collect sunlight on large objects, such as glass windows."
According to reports, this type of energy gathering materialis not only suitable for glass, but also for materials such as plastic sheets. It can also be made into color or transparent colorless, and when applied to glass windows in transparent color, it will not affect the lighting.
The current coated tempered glass will have a highertransmittance
2. What are theclassifications of photovoltaic glass?
The classification of photovoltaic glass mainly includesultra white photovoltaic embossed glass, ultra white processed Float glass, TCO glass andbackplane glass. The main characteristics are analyzed as follows:
(1) Ultra White Photovoltaic Embossed Glass
For semi-finished embossed glass products, the speciallydesigned patterns on the glass surface help solar cells absorb sunlight and reduce light reflection. Including ultra white photovoltaic embossed original
glass and ultra white photovoltaic processed glass.
(2) Ultra white processed Float glass
Ultra white photovoltaic raw glass can be processed intoultra white photovoltaic processed glass through tempering process, which can achieve ideal mechanical strength to resist adverse weather conditions and other factors of damage. During the tempering process, an anti reflective
coating can be added to improve efficiency.
(3) TCO glass
At present, the mainstream product in the market is 3.2mmultra white photovoltaic glass, with solar cell spectral wavelengths ranging from 320 to 1100 nanometers, and solar transmittance reaching up to 91% to 92%.Can be used as a packaging board for crystalline silicon solar modules. Due to the low solar transmittance, the application of this type of crystalline silicon solar module photovoltaic glass is gradually decreasing.
(4) Back panel glass
When ultra white Float glass is used for manufacturing, theglass surface will be coated with TCO coating ITO, FTO or AZO) to act as the conductive layer of the power generated by the thin film battery. The packaging plate and conductor of TCO glass used for thin film solar modules are made of
Float glass.
3. Production process ofphotovoltaic glass
The deep processing process of photovoltaic glass involvestwo steps: tempering and coating. The original sheet is ground and then tempered to obtain tempered sheets, or tempered and coated to obtain coated
sheets for component packaging. Tempering enhances the strength of glass, while coating involves coating the tempered glass with a layer of anti reflective film to enhance transparency.
The tempering and coating processes both require hightemperature treatment at around 700 ℃. In order to control costs, Solar Control Glass deep processing often uses both glass tempering and film heat treatment simultaneously.
In the production process of photovoltaic glass, the cellarfurnace is the core production equipment and also a large investment equipment. It has two main characteristics, namely, the difficulty in controlling the
temperature of large cellar furnaces and the high cost of starting and stopping cellar furnaces, making it impossible to adjust the production line halfway.
The cost of photovoltaic glass can be divided into fourparts: direct materials, fuel power, direct labor, and manufacturing costs, with raw materials and fuel power costs being the main sources, accounting for
up to 80%.
The raw materials used in the production of photovoltaicglass raw materials include soda ash, quartz sand, feldspar, dolomite,limestone, mirabilite, etc. Quartz sand and soda ash are not only the main
components in material input, but also the two types of raw materials that have a significant impact on material costs.
The quality requirements for quartz sand in photovoltaicglass are relatively high, so a high-quality and stable supply of quartz sand in the future is the guarantee for the development of photovoltaic glass
enterprises.
Other raw materials include limestone, dolomite, mirabilite,etc. The cost of these materials is relatively small compared to soda ash and quartz sand, and there is also little fluctuation.
The cost of fuel power mainly includes fuel and electricity.Glass fuel mainly consists of natural gas and heavy oil, which are used in kiln equipment during the production process of raw materials;
Labor cost refers to the labor and Labor burden consumed inthe production and construction of photovoltaic Glass production. The level of labor costs to a certain extent reflects the level of production or
construction technology and equipment, as well as the level of labor productivity. Therefore, in order to effectively reduce labor costs, it is necessary to continuously improve the automation rate of the kiln and extend its service life.
Manufacturing costs refer to the costs incurred in the manufacturingprocess of photovoltaic glass. After mixing, melting, rolling, annealing, and cutting the raw materials, an untreated photovoltaic raw material semi-finished product is obtained and further processed.
Photovoltaic glass is a special type of glass that utilizessolar radiation to generate electricity by laminating into solarcells, and has relevant current extraction devices and cables. The glass used in photovoltaic power generation is not ordinary glass, but TCO conductive glass.
